NekoCal Assembly Instructions


STEP 1 Check contents

As shown

STEP 2 Tape the screen onto the holder

Use double sided tape, do as shown in the photo.

Fold the flex cable here, also tape it down.

STEP 3 Tape the PCB onto the holder

Insert the flex cable into the motherboard, tape the PCB on to the holder using double-sided tape.

STEP 4 Assemble the panel

Remove the protective film on both sides of the front panel, install the short spacer with screws. Then install the holder as shown.

STEP 5 Finish

Connect SD card and USB cable.